AdorStore Automatic Chicken Door

 The ADOR1 has connector pins (six pins) on the electronic board where a pair of wires can be connected for manual activation.   The pair of  can wires run over to a convenient place where you can use a doorbell button or any type of switch, to remotely control the ADOR1.  The switch will function the same way as the pushbutton on the ADOR1 control box. 

In the CATALOG we have the complete External Pushbutton switch kit (EPB)  or if you want to DIY (do it yourself) you may need only the Remote Button Connector for the pushbutton switch.

Written by Rod Neumann — January 16, 2013

Welcome

aedfgagf